Do you have an Intelligent Transportation Project we can help with?

Consultancy and Supply & Integration services related to Toll Management Systems

Get a free quote

Toll Management System iSToll

Our TMS System is developed with the Vision of providing BEST SUITED SOLUTION to our clients. Named as iSToll, it is state if art system with Compliance as per NHAI/IHMCL standards. iSToll combines the most robust hardware/electronics and software to form the most robust and reliable system.
iSToll provides flexibility and control as per the client and project requirement.

Improved AVC System:
Infrared sensor based AVC with lean hardware (can be converted/Replaced with Intrusive, Profiler technologies or Camera Based Vision AVC as required by client).

In house critical hardware and software development
The critical hardware of the system like AVC and lane controller are manufactured in the facility of Intelliroute and the entire system software is developed by the in house software team resulting in no dependence on third party companies and minimum support time.

Advanced Reliability
Components of high reliability used resulting in higher uptime of lanes.

Simple Design Architecture
Design Architecture results in less time in troubleshooting and correcting an issue so that a lane is restored in the shortest time possible in case of a fault.

ETC with minimum downtime
The seamless flow of data achieved through simple networking architecture and robust hardware ensures the minimal downtime of the electronic toll collection system.

Advanced Traffic Management System

Premium integration of IT and ITES enables us to deliver efficient HTMS solutions. We deliver real time traffic data with the help of a traffic detection system. It constantly tracks the flow of vehicles to and fro. Violation of any rule by vehicles would result into traffic routing and VMS messaging. We provide complete IT and ITES solutions to the authorities for installing HTMS successfully.

  • We Deal in ATMS Equipment:
  • Variable Message Signs (VMS)
  • Radio Mobile Communication
  • Automatic Traffic Counter cum Classifier (ATCC)
  • Meteorological Data Systems (MET)
  • CCTV Camera (PTZ Camera )
  • Emergency Call Box (ECB)
  • Travel time Estimation system(TTES)
  • Vehicle Actuated Speed display(VASD)
  • Video Incident Detection system (VIDS)
  • Portable Weigh in motion
  • ATMS Control Centre
  • Optical fibre cable Network
  • WiFi Enabled networking

Medium Speed Weigh-In-Motion System

Throughout the heavily loaded vehicles passing from Toll Plazas, Border Check posts, mines, etc. Intelliroute India ensures to provide weigh in motion (WIM) solutions. Our products and services cater to low speed, high speed and portable vehicle weigh in motion systems with best in class with our own Indian designed and tested Technology.

Significant Our Designed WIM Technology:

  • Speed Up to 60 km/h
  • Negligible Civil Installation, lane closure time, and cost.
  • High Accuracy
  • No Mechanical Wears & Tears
  • Low Maintenance
  • Primary Precautions for heavy vehicles from overloading
  • Prevents accidents and loss of life
  • Provides accurate weighing data to help prevent any mishappening
  • Increases throughput
  • Helps in maintaining road assets

Electronic Toll Collection System- ETC

Intelliroute is well fortified with experienced workforce and system processes for delivering innovative solutions for Electronic Toll Collection System in Hybrid and Fully automated Dedicated ETC Lanes. With constant flow of traffic crossing Toll Plaza’s, it becomes essential to bring in a smooth interface for avoiding the untidiness. We deliver innovative TMS or ETC solutions, services and resources that set up system designing and development of back office processes, image processing, financial reporting, violations in toll payments, etc.

ETC lanesFeatures:
• Seamless integration with the CCH server
• Compatible with both dedicated and hybrid solution
• Fully automated vehicle flow without human intervention
• Robust and reliable hardware used for accurate tag detection
• Maximized Uptime of the ETC lanes
• Updated ETC modules as per MORTH & NHAI latest guidelines.

SOP designing for Toll Collection Operation

We Intelliroute team with our many years of Experience in ITS industry provide the services to design the Standard Operating Procedure for the toll system maintenance & operational procedures to establish the appropriate decorum in industry and create well reporting internal mechanism.

• SOP lays out who is responsible for a task and ensures that the organization’s operations comply with requirements of Concession Agreement / Contract.

• SOPs help employees & organization to follow the correct methods for all of the organization’s most essential tasks.

Our team has carried out a number of Due Diligence and development of SOPs for Toll Plaza Operations across India.

Toll plaza diligence for operation & systems

As a Part of the industry we think toll technology is paying prime part in toll collection and revenue collection assurance. Due to the technology failure and inefficient systems it is observed that the appropriate reporting not come to the right authority and its impacting wrong flow for the organisation growth.

Due diligence of TMS is important to find out and evaluate its sufficiency, ruggedness, accuracy and security so that it can be improved which ultimately leads to increased revenue & profits for the Operator.

  • Analysis of entire operational process of the toll plaza to find out its sufficiency as well as operational glitches and pilferage, if any.
  • Review of Toll Management System and all its components for their existing performances like incident generation, incident management etc.
  • Review of working condition of various TMS equipment’s, synchronization with other tolling equipment etc.
  • Review of Downtime and AVCC accuracy System with reports of past durations for finding out inaccuracy, if any.
  • Solution Study: Suggestions for issues observed in TMS and its operation procedure.

Your Content Goes Here

Highway Lighting/Street Lighting

Highway Lighting or street Lighting is based on The Indian Roads Congress (IRC). IRC is the Apex Body of Highway Engineers in the country. The IRC was set up in December, 1934 on the recommendations of the Indian Road Development Committee best known as Jayakar Committee set up by the Govt. Of India with the objective of Road Development in India. Highway lighting consists of providing illumination through lights in the vicinity of a highway/road/street.

Highway Lighting/Street Lighting

Highway Lighting or street Lighting is based on The Indian Roads Congress (IRC). IRC is the Apex Body of Highway Engineers in the country. The IRC was set up in December, 1934 on the recommendations of the Indian Road Development Committee best known as Jayakar Committee set up by the Govt. Of India with the objective of Road Development in India. Highway lighting consists of providing illumination through lights in the vicinity of a highway/road/street.

Highway Lighting needs

  • Highway lighting is particularly required at road intersections, railway level crossing, bridges and other cross-drainage works, and near stretches of road-repair and temporary diversions, where restriction to free flow of traffic exists. This increases the road safety and adds to the visual appeal near such locations.
  • Although the vehicle headlights may be adequate for normal night driving, highway lighting is an additional and valuable facility for the road-users.

  • Further, provision of proper lighting in the vicinity of and approaches to different roadside amenities like petrol pumps, service area, rest areas, Underpasses, Toll plaza, Bus bay and bus shelter, truck parking area and all junction area makes it easy for fast traffic to identify such amenities sufficiently in advance besides enhancing the aesthetics.

  • Accidents are known to occur more during nights than during the day; this is attributed to poor visibility of potential hazards at night time and lack of proper lighting for the road or highway.

Street Lighting

  • Measures
  • Lux Calculation Through DiaLux Software
  • Operating hours
  • Power
  • Light source
  • Fixture
  • Control system
  • Lux Testing Through Lux Meter

Toll Plaza Lighting

The toll plaza shall have lighting system to provide visibility to drivers for the use of facility specially to access the correct service lane and also to the toll collector. Indian Standard ‘Code of Practice for Lighting of Public Thorough fare IS: 1944 shall be followed. This would be done by interior and exterior lighting as indicated below. Power supply shall be from public power supply system, but stand by generating set of the capacity to supply the required power shall be provided at toll plaza.

  • Interior Lighting: The toll booths and facility building office shall be illuminated adequately. Indoor lighting shall be with fluorescent lamps. Lighting should be provided in such a manner that glare is avoided or minimized. The level of illumination shall be 200 to 300 Lux as per IS:3646 Part II.

  • Exterior Lighting: Lighting of the Toll Plaza is important for enhancing night visibility. The lighting system shall consist of the following major components.

  • High Mast lighting

  • Canopy lighting of complex

  • Lighting on both side approaches to the Toll Plaza

Tunnel Lighting

As our road networks become more crowded, the use of tunnels and underpasses is expanding, both to improve traffic flow, and to protect local environments from increased traffic exposure. Within tunnels, where maintenance access can be limited, and where corrosive atmospheric conditions are common, reliable performance of the lighting system is critical, as is the need for the absolute minimum of operational maintenance requirements.

The aims of tunnel lighting are:

  • Firstly, to allow traffic to enter, pass through and exit the enclosed section safely

  • Secondly, to do so without impeding the through-flow of traffic. These aims are achieved by the adequate illumination of the tunnel interior, which allows drivers to quickly adjust to the light within, identify possible obstacles, and negotiate their passage without reducing speed. These requirements apply during the day when the contrast between outside and inside is significant and at night when it is less but reversed.

Solar Blinker

Solar blinker is useful for indication, array design, as guideline indications also. It helps to stops much accidental activity and also right for pathway and also for bump indications. This Solar Road Safety Warning Blinker uses solar energy to operate the signal. So there is no need for an Electricity supply. The whole assembly includes Solar Panel, Frame for Solar Panel, Traffic Signal Blinker, Wire Harness, Charge Controller, Battery, Battery Box, Signal Pole, etc.

Replacement of Traditional Lighting with Led

Choosing the eco-friendly LED Light solutions of Intelliroute India Service, in fact, there are many advantages including the optimization of consumption, the reduction of maintenance costs and the absence of high temperatures, generated instead by traditional commercial lights lamps. The LED Light solutions can stimulate photosynthesis perfectly, extend the daylight period, make indoor growing possible and plan climate conditions according to the needs of different-different place. The use of special LEDs that emit light at dedicated frequencies, in fact, with spectral levels capable of increasing production, safe driving, leads to the optimization of available energy and environmental resource.

From our elite products

Trusted Partners

Our proud clientele with 100% customer satisfaction.